Filter
Top Products
5
• Fit a storage bin to the grooves on each side of the keyboard.
Hint: The storage bins are designed to fit one way.
• Insert two #8 x
3
/4” (1.9 cm) screws into each storage bin
and tighten.
Storage Bin
Storage Bin
• Turn the assembly upright.
• “Snap” the clock into the slots in the top side of the assembly.
Clock
Desktop
Pegs
• Fit the pegs on the desktop into the slots in the top side of
the assembly.
Retainer
Retainer
• Fit a retainer over each desktop peg.
• Insert two #6 x
1
/2” (1.3 cm) screws into each retainer
and tighten.
• Lift and lower the desktop.
Assembly
7
6
8
5
5