Filter
Top Products
Shelf
Slots
Keyboard
Legs
• Place the keyboard face down on a flat surface.
• Fit the legs into the keyboard.
Hint: The legs are designed to fit one way.
• Insert three #8 x
3
/4” (1.9 cm) washerhead screws into each leg
and tighten.
• Position the shelf.
• Fit the ends of the shelf into the slot in each leg.
• Fit a foot onto each leg.
Hint: The feet are designed to fit one way.
• Insert three #8 x
3
/4” (1.9 cm) screws into each foot and tighten.
Feet
Assembly
4
4
1
2
• Insert two #8 x
3
/4” (1.9 cm) washerhead screws into each end
of the shelf and tighten.
3
4