Filter
Top Products
8
Storage
• Insert the restraint belts back through the small slots in the pad.
• Insert the restraint pad down through the large slot in the pad.
Large Slot
Small Slot
Small Slot
• Turn the rocker face down.
• Tuck the ends of the restraint pad underneath the buckles, as shown.
1
2
Care
• The pad is machine washable. Wash the pad separately in
cold water on the gentle cycle. Do not use bleach. Tumble dry
separately on low heat and remove promptly.
• The frame, toy bar and toys may be wiped clean using a mild
cleaning solution and a damp cloth. Do not use bleach. Do not
use harsh or abrasive cleaners. Rinse clean with water to remove
residue. Do not immerse the frame, toy bar and toys.
To remove the pad:
• Unfasten the buckles around each side rail. Turn the seat face
down on a flat surface. Unfasten the buckles on the pad.
• Turn the seat upright. Remove the hardboard from the slot in the
front edge of the pad.
• Pull the front and back of the seat back area of the pad apart.
Lift the pad off the seat.
To replace the pad, refer to Assembly steps 9 and 10.