Filter
Top Products
Assembly
•Insert two
3
/
8
" screws into the holes in the end of each side rail.
Tighten the screws.
1
7
•Insert and “snap” each of the eight tabs on the mesh into the
matching slots in the legs to secure the mesh.
1
8
Tab
1
5
•Fit the smaller end of one side rail into the hole in the tunnel.
•Push the side rail so that it slides through the fabric tube in the
tunnel and emerges at the other end.
•Repeat this procedure to insert the other side rail.
1
6
Side Rail
•Turn the assembly around again and insert two 2" screws
through the tunnel top and into each leg, as shown. Tighten
the screws.