Filter
Top Products
Assembly
Tunnel Top
Connector
Socket
•Locate the two legs with sockets in the top.
•Locate the two connector wires coming from the tunnel top.
•Insert and “snap” each connector into the matching socket,
as shown.
•Fully insert the two legs into the openings in the tunnel top.
•Turn the assembly around and insert two 2" screws through the
tunnel top and into each leg, as shown. Tighten the screws.
1
1
1
2
1
3
•Fully insert the other two legs into the openings in the tunnel top.
Hint: The legs will only fit one way.
1
4