Filter
Top Products
7
7
7
Assembly
12
Front
Leg Holes
Screw Retainer - 2
#10 x 2.2 cm Black Screw - 2
• Insert the frame front legs onto the front base.
• Fit a screw retainer over a hole in the front leg.
• Insert a #10 x
7
/
8
" (2.2 cm) black screw through the screw
retainer and front leg. Tighten the screw.
• Repeat this procedure to secure the other end of the front
base with the remaining screw retainer and #10 x 2.2 cm
black screw.
Hint: The #10 x 2.2 cm black screws may have been assembled to the
screw retainers.
Screw Retainers
13
Seat Bottom Tube Ends
Push Seat
Height
Adjuster
Push Seat
Height
Adjuster
#8 x 1.9 cm Screw - 2
• Push each seat height adjuster to be sure they are completely
on the seat bottom tubes.
• Insert a #8 x 1.9 cm screw through each seat height adjuster
and the ends of the seat bottom tube. Tighten the screws.