H3427a-0920
4
3
5
• Wipe the steering column with a paper towel to remove any
excess lubricant.
• Turn the vehicle on its side.
• Insert the straight end of the steering column up through the hole in
the vehicle floor and out through the hole in the dash.
• Insert the end of the steering column through the hole in the
steering rod.
• Fit the
3
/8
"
washer on the end of the steering column.
• Before applying the labels, wipe the surface of the vehicle with a
clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustration.
• For best results, avoid repositioning a label once it has been applied
to the vehicle.
2
9
ASSEMBLY
F
H3427a-0920
Dash
Key Assembly
• Insert and “snap” the key assembly into the opening in the dash,
as shown.
Steering
Column
Hole
End of
Steering
Column
Steering
Rod Hole
9
17
9
7
6
Washer
DASH VIEW
BOTTOM VIEW