Filter
Top Products
H3427a-0920
10
Hood
Latch
Slot
Hood
Latch
Slot
Brush Guard
Front Bumper
• Fit and hold the brush guard against the front bumper.
• Insert two #10 x 1" screws into the brush guard and tighten.
Hood
Tabs
• Insert the tabs on the hood into the slots in the front end of
the vehicle.
• Pull the hood forward and lower it closed.
Slot
Slot
13
• Insert a hood latch into one of the slots in the front end of
the vehicle.
• Twist the base of the hood latch
1
/
4
turn to secure it in the
vehicle.
• Repeat this procedure to attach the other hood latch to the vehicle.
11
ASSEMBLY
F
11
H3427a-0920
• Position the windshield so that the molded detail on the wipers
faces the front end of the vehicle.
• Insert and “snap” the two large tabs on the windshield into the
large slots in the dash.
• Pull up on the windshield to be sure it is secure.
Windshield
Wipers
Large
Tab
Large
Tab
Large Slots
12