Filter
Top Products
6
Assembly
Tab
Ramp
• Align the tabs on the edge of the castle with
the slots in the ramp.
• Fit the tabs into the slots and press firmly
on the castle to “snap” the ramp in place.
•Position the castle so the bottom is facing you.
•Insert two screws through the holes in the
ramp. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
Post
6
• Fit a fence post over a matching peg on the
bottom of the toy as shown.
• Insert a screw through the post and into the
peg. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• Repeat this procedure to attach the other
three fence posts.
7
Bottom View
Bottom View