Filter
Top Products
4
Assembly
Drawbridge
• Position the drawbridge so that the door-
knocker is facing down.
• Insert the peg on one end of the drawbridge
into the hole in the castle.
• Bend the drawbridge slightly and insert the
other peg into the hole in the castle.
1
Throne
with Tube
• Fit the throne tube over the flat post inside
the castle as shown.
Hint: You will need to tip the throne to fit it
into the castle.
Flat Post
2
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052 U.S.A.
©2003 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN CHINA C1159b-0920
3
Spire
Horn
Peg
•Fit a horn onto a peg on each side of the spire.
•Insert a screw through the hole in each horn.
Tighten the screws with a Phillips screwdriver.
Do not over-tighten.