Filter
Top Products
•Turn the seat bottom assembly upright.
•Fit the seat back pins into the openings in the top side of
the seat bottom assembly.
Seat
Bottom
Assembly
Seat Back
Pin
Seat Back
Pin
Opening
Opening
Assembly
•Turn the seat assembly face down.
• Insert the hinge rod through the hinge on the seat back
and seat bottom, as shown.
• Insert a #10 x 2.2 cm (
7
/8") black screw into the hinge rod
and tighten.
•Set the seat assembly aside for Assembly step 10.
•Pull the frame leg out on each frame to open. Make sure it
“clicks” into place.
5
Hinge Rod
Hinge
Frame Leg
5
6
7
#10 x 2.2 cm (
7
/
8")
Black Screw
SHOWN ACTUAL SIZE