Filter
Top Products
To tighten the belts:
•Feed the anchored end of the belt up through the buckle to form a loop .
•Pull the free end of the belt .
•Repeat this procedure to tighten the other belt.
To loosen the belts:
•Feed the free end of the belt up through the buckle to form a loop .
Enlarge the loop by pulling on the end of the loop toward the buckle.
•Pull the anchored end of the belt to shorten the free end of the belt .
•Repeat this procedure to loosen the other belt.
Please Note: After adjusting the belts to fit your child, make sure you pull on
them to be sure they are securely fastened.
B
B
Set-Up & Use
14
Loosen
B
B
Anchored End
Free End
Tighten
Free End
2
Anchored End
Calming Vibrations
•Make sure your child is properly secured in the seat.
•To turn vibrations on, slide the power switch on the soothing unit to the on
position .
•To turn vibrations off, slide the power switch on the soothing unit to the off
position .
IMPORTANT! If vibrations from the soothing unit become faint,or if there
are no vibrations, remove the battery from the soothing unit and dispose of
it properly. Replace the battery with a new LR20 (“D”) alkaline battery.
3