Filter
Top Products
Assembly
5
•Place the rear base on a flat surface so that the buttons
face the front base.
•While pressing the buttons on each side of the rear base,
fit the rear legs onto the rear base. Push the rear legs
down until the buttons on the rear base “snap” into the
holes in each rear leg.
Rear Base
Front
Base
Rear
Legs
•Position the seat face down, with the top of the seat
facing you.
•Position a seat tube so that the long end is upright and
toward you and the curved end is toward the outside edge
of the seat.
• Insert the curved end of the seat tube through the holes in
the ridges on the seat back.
•Repeat this procedure to assemble the other seat tube to
the seat.
Press
Button
Press
Button
6
•While standing on the rear base,pull the rear legs up.
They should remain secured to the rear base. If you can
remove the rear legs,you have not assembled them cor-
rectly to the rear base. Reread and repeat assembly step 6.
•Set the frame assembly aside for Assembly step 17.
Rear Legs
Pull Up
Pull Up
Rear Base
7
8
Top of Seat
Seat Tube
Long Ends
Ridges
•Pull both rear legs out until they “snap” into place.
Pull
Rear
Leg
Pull
Rear
Leg
5
Curved
End