Filter
Top Products
•Place the front base on a flat surface.
•Position a front leg (longer) so that the tapered end is
downward, as shown.
•While pressing the button on one of the front legs, insert it
into the front base.Push down on the front leg until the
button “snaps” into the hole in the front base.
•Repeat this procedure to assemble the other front leg to
the front base.
Front Base
Tapered End
Tapered End
Front Legs
(Longer)
IMPORTANT!
Before assembly,inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use
if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts.
Assembly
•While standing on the front base,pull the front legs up.
The front legs should remain secured to the front base.
If you can remove the front legs,you have not assembled
them correctly to the front base.Reread and repeat
assembly step 1.
4
Press
Button
Press
Button
Front Legs
Pull Up
Pull Up
Front Base
1
2
•Position the housing so that the hub is inward.
•While pressing the button on the top of front leg, insert it
into the housing slot, as shown. Push the front leg until the
button “snaps” into the hole in the housing.
•Repeat this procedure to assemble the motor housing to
the other front leg.
•Pull the front legs down to be sure they are secure in the
housings. If you can remove them, you have not assembled
them correctly. Please re-read and repeat this assembly step.
Hub
Housing
Slot
Motor
Housing
Front
Legs
Press
Buttons
3
•Position a rear leg so that the tapered end is upright.
•While pressing the button on the top of the rear leg, insert it
into the housing short tube, as shown.Push the rear leg
until the button“snaps” into the hole in the short tube.
•Repeat this procedure to assemble the other rear leg to the
motor housing short tube.
•Pull the rear legs down to be sure they are secure in the
housings. If you can remove them, you have not assembled
them correctly. Please re-read and repeat this assembly step.
Button
Rear Legs
4
Motor Housing
Short Tube
Tapered
End