Filter
Top Products
• Point the remote controller
at the projector and press
the button to advance to the
next frame.
Hints:
• The remote controller works
best when you have a clear
path between the remote
controller and the projector
with no obstructions.
• The maximum range of the
remote controller is about
10 feet. If you find the range of
your remote controller is greatly
reduced, battery power in the
remote controller may be weak.
Replace both batteries in the
remote controller with fresh,
new alkaline batteries.
• You can also change pictures by
pushing the advance lever on
the projector.
• If you do not advance the reel
for a few minutes, the projector
shuts off automatically. Press the
advance lever on the projector
to turn it on again.
• It is normal for the projector
to be warm to the touch after
extended periods of use.
• After the show, snap the
remote controller back under
the handle for storage.
Remote Controller
Advance
Lever
6
5
PRESS