Filter
Top Products
IMPORTANT! Should the light bulb stop
working, an adult should remove it and
replace it.
• Loosen the screws in the battery compartment with a Phillips screwdriver
and remove the door.
• Remove the batteries.
• Loosen the screw in the bulb compartment door with a Phillips screw-
driver and open the door.
• Remove the bulb sleeve from the bulb compartment.
• Pull to remove the light bulb. Beware of cracked or broken glass.
• Insert a new, KRP113 Krypton bulb (or equivalent) into the bulb sleeve.
• Place the bulb sleeve back in the bulb compartment.
• Close the bulb compartment door and tighten the screw with a Phillips
screwdriver. Do not over-tighten.
• Replace the four size "D" (LR20) alkaline batteries as indicated inside
the battery compartment.
• Replace the battery compartment door and tighten the screws with
a Phillips screwdriver. Do not over-tighten.
Light Bulb Replacement
4
Bulb
Bulb Sleeve
CAUTION
To prevent burns from hot bulb, let bulb
cool for several minutes before replacing.