Filter
Top Products
Stage 3 - Stand & Play Piano
4
4
2
2
•Position the keyboard so it faces up.
• Fit a leg assembly to the side of the keyboard, as shown.
•Turn the knob clockwise to secure the leg assembly to
the keyboard. Make sure the knob is fully tightened.
• Repeat this procedure to attach the other leg assembly
to the keyboard.
3
3
• Rotate the hangers up and “snap” them into place.
• Attach the toys to the hangers and tabs as shown.
• Slide the mode switch to . Press the keys to play note by
note like a real piano, as stars light up.
• Slide the mode switch to . Press the keys to hear notes
that sound like they’re sung by a children’s chorus.
• Locate the volume switch on the bottom of the keyboard.
Adjust volume to high
;
or low , for your child’s comfort.
Stage Switch
• Slide the stage switch to for use with standing toddlers.
Hint: If your child is not actively playing with this toy, it turns
off automatically (sleep mode).
• Be sure to slide the stage switch to the off position
when not in use.
Leg Assembly
Knob
Tab
Hanger
Leg Assembly
Mode Switch
Volume Switch
6
Star Button
Support
Leg
Large Slot
• While pressing the star buttons on a support, fit the end
of the support into the large slot in one of the legs, as
shown. Push the support until it “snaps” into place.
• Repeat this procedure to attach the other support to the
remaining leg.
1
1
To change from Stage 2 to Stage 3
•Turn the threaded knobs counter-clockwise and
detach the leg assemblies from the keyboard.
• Press the star buttons and remove the two
supports from the legs. Now proceed to step 2.
If you have not used this toy before and are
assembling it for first time use in Stage 3, start
with Step 2.