Filter
Top Products
Assembly
5
•Place the rear base on a flat surface, as shown.
•While pressing the buttons on each side of the rear base, fit
the rear legs onto the rear base. Push the rear legs down
until the buttons on the rear base “snap” into the holes in
each rear leg.
Rear Base
Front
Base
Rear
Legs
•While standing on the rear base, pull the rear legs up.
They should remain secured to the rear base. If you can
remove the rear legs, you have not assembled them cor-
rectly to the rear base. Re-read and repeat assembly step 5.
•Set the frame assembly aside for Assembly step 8.
Press
Buttons
Rear Legs
Pull Up
Pull Up
Rear Base
5
•Position the seat frame on a
flat surface.
•Fit the hole in the seat hubs
onto the seat frame tubes.
•Press the upper buttons on
the seat frame tubes and
slide the seat down.
•Press the middle buttons on
the seat frame tubes and slide the seat down.
•Press the lower buttons on the seat frame tubes and slide
the seat down.
•The seat should be touching the footrest.
7
6
Seat
Hub
Seat Frame Tubes
Press Upper
Button
Press Middle
Button
Press Lower
Button
Press Lower
Button
Press Middle
Button
Press Upper
Button
Seat
Hub
79739b-0920.qrk 10/25/01 11:11 PM Page 5