Filter
Top Products
Toddler Bed Assembly
• Check to be sure the crimped mattress tubes are inserted
properly.
• There is a metal tab on one side of the crimped end. Make
sure the metal tab is not showing.
• Pull up firmly on the straight side rail to be sure the
mattress tubes are securely in place.
• If the straight side rail can be removed from the crimped
mattress tubes, re-read and repeat step .
• Repeat steps - to assemble the curved side rails and
remaining crimped and regular mattress tubes.
• Make sure the curved ends of the curved side rails are on
the same side.
5
6
• Place both metal frame assemblies on a flat surface.
• Insert the straight side rails into the curved side rails,as
shown.
7
4
• Position the other straight side rail so that the screw holes
on each straight side rail are on the same side.
Helpful Hint: The assembly of the crimped mattress tubes
to the straight side rail is permanent. Once assembled prop-
erly, you will be unable to remove the straight side rail.
• Fit the slots and hole in the straight side rail onto the
mattress tubes.
• Push down on both ends of the straight side rail to be sure
the crimped mattress tubes snap into place.
Straight Side Rail
Crimped Mattress Tubes
Screw Holes
INCORRECT CORRECT
Metal Tab
Showing
Crimped Mattress Tube
Mattress Tube
Curved Side Rail
Crimped Mattress Tubes
Mattress Tube
Curved Ends
Curved Side Rail
Curved Side Rail
Straight Side Rail
Straight Side Rail
34
4
1
5