Filter
Top Products
5
Assembly
•Fit the upper rail onto the legs,as shown.
•Push down firmly above each leg until, you hear the upper rail
“snap” into place on each end.
•Pull up on the upper rail to be sure it is secure.
Note: Remove the tape on the legs and around the base
sockets.Throw the tape away.
1
1
1
2
2
2
3
3
3
4
4
4
5
•Fit the “T”end of the strap on the trumpet through the slot in
the upper rail.Pull the trumpet to be sure it is secure in the
upper rail.
6
Upper Rail
Trumpet
Upper
Rail Slot
Hint: You may want to use the end of a slotted screwdriver to push
the “T” end of the strap through the slot.
PUSH
PUSH
“T”End
•At an angle,fit the single tab on the bell into the slot in the
upper rail.
•Now, push and “snap” the other two tabs on the bell into the
slots in the upper rail.
•Position the mirror so that it is toward the inside of the product.
• Insert and“snap” the tabs on each end of the mirror into the
matching slots in the upper rail.
7
8
Bell
Upper
Rail
Slot
Mirror
Slots
PUSH