Filter
Top Products
14
Seat Back Adjustment
The seat back can be adjusted upright or
reclined for baby’s comfort.
Reclined – Press the button on each plastic
cover to lower the seat back.
Hint: If your child is not seated in the seat, you will need to push the seat
back at the same time you are pressing both buttons on the plastic covers.
Upright – Lift the seat back until the buttons snap into the opening in
each plastic covers. Make sure you hear a "click" on each side. Push the
seat back to be sure it is secure in the upright position.
SET-UP & USE
3
Lift for
Upright
Lower for
Recline
Button
Press
Button
13
SET-UP & USE
To tighten the restraint:
• Feed the anchored end of the restraint strap up through the buckle to
form a loop .
• Pull the free end of the restraint strap .
• Repeat this procedure to tighten the other restraint strap.
To loosen the restraint:
• Feed the free end of the restraint strap up through the buckle to form
a loop .
• Enlarge the loop by pulling on the end of the loop toward the buckle.
• Pull the anchored end of the restraint strap to shorten the free end of
the restraint strap .
• Repeat this procedure to loosen the other restraint strap.
Please Note: After adjusting the restraint straps to fit your child, make
sure you pull on them to be sure they are securely fastened.
B
B
Loosen
Tighten
B
Anchored End
Free End
Anchored End
Buckle
Free End
Buckle
B
2
Press