Assembly
7
5
• Insert and "snap" the peg on the bottom of the radar dish into
one of the two large holes on the roof of the terminal.
• Insert and "snap" the peg on the bottom of the binocular viewer
into the other large hole on the roof of the terminal.
• The windsock can be inserted and removed from any of the
smaller holes on the roof of the terminal.
• The umbrella can be inserted and removed from the hole in the
table on the terminal base.
6
Terminal Base
Groove
• To attach the terminal to the track, place the ridge on the bottom of
terminal base into the groove in the track.
Hint: Lift the terminal base to separate from the track for easier storage.
Table
Binocular
Viewer
Radar Dish
Windsock
Umbrella
Track
Terminal