Filter
Top Products
Assembly
5
1
2
Terminal Base
Terminal
• Position the terminal base on a flat surface. Insert and "snap" the
tabs on the bottom of the terminal into the slots in the terminal
base as shown. Press firmly on the building to make sure all five
tabs have snapped in place.
• Pull up on the terminal to be sure it is secure.
• Place the bridge base on a flat surface. Insert and "snap" the tabs
on the ramp into the slots in the bridge base as shown.
• Insert and "snap" the tabs on the ramp with fuel pump into the
slots in the bridge base as shown.
Bridge Base
Ramp with
fuel pump
Ramp