Filter
Top Products
20
Troubleshooting Guide
• The control tower power may be turned off. Make sure
the reset button is in the on ● position. Press the
ON/OFF button again.
• The control tower may have turned off automatically and
the ON/OFF button will no longer be lit. Press ON/OFF
button on the control tower to turn it on again. The
button should light up.
• Battery power in the control tower may be weak.
Replace all four batteries in the control tower with fresh,
alkaline batteries.
Symptom Solution
Car does not respond to
the remote controller
Automatic Course
Control feature is
not working
There are no sound
effects when the
car crosses the
starting ramp
• The car mode switch may be set to off O. Be sure the
mode switch on the car is set to l or ll .
• The power indicator on the car is off, and the car may
have turned off automatically. Press the ON/OFF button
on the car to turn it on again. The button should light up.
• If the ON/OFF button on the car is lit, battery power in
the remote controller may be weak. Replace the battery
in the remote controller with a fresh, alkaline battery.
• You may be beyond the range of the remote controller
which is about 15 feet (with no obstructions).
• Make sure the mode switch on the car is set to the I
position and turned on. The ON/OFF button should be lit.
• Make sure the control tower reset button is turned on
●.
• Make sure the flexible track is completely connected to
the control tower on both sides. The ON/OFF button
should be lit up.
• The control tower may have turned off automatically and
the ON/OFF button is not lit. Press ON/OFF button on
the control tower to turn power back on. The button
should light.
• The car may be going around the track in the wrong
direction. Be sure the car is pointing in the same
direction as the arrows on the starting ramp. The car
should move around the track counter-clockwise.
• The car is too far from the flexible track. Make sure
the car is within four inches of the track for best
performance.