Filter
Top Products
ON/OFF
Button
12
Mode I - Beginner Driver
On/Off
Button
• Slide the mode switch on top
of the car to I for beginner
driver mode.
• Locate the speed control switch
on the bottom of the car.
• Slide the switch to either slow
speed or fast speed .
Hint: We recommend slow speed
for first time drivers.
• Press the ON/OFF button on top
of the car to turn the car on. The
car button lights up. The car is
now ready to receive a signal
from the remote controller.
Hint: If the car has not been driven
for a few minutes, it turns off
automatically. Press the ON/OFF
button again for power in the car.
Reset Switch
On/Off
Button
• Locate the reset switch on the
back of the control tower.
• Slide the reset switch ON .
• Locate the ON/OFF button on
the front of the control tower.
• Press the ON/OFF button to
turn the track and the control
tower on. The button lights up
if the track is properly
connected!
Hint: If the car has not driven
past the control tower in a few
minutes, the control tower turns
off automatically and the control
tower button light goes out.
Press the ON/OFF button again
for power in the control tower
and track.
Speed Control Switch
Mode Switch
Let’s Go