Filter
Top Products
Assembly
Inside View
14
Fit the jail inner wall pegs into the holes in the base.
15
Insert the jail balcony tabs and peg into the slots in the jail front and side walls.
Push on the jail balcony until the tabs snap into place.
16
Insert the jail floor tabs and pegs into the slots in the jail front and side walls. Make sure the
top edge of the jail inner wall fits into the groove in the underside of the jail floor. Push on the
jail floor until the tabs snap into place.
17
Insert and snap the tabs on the jail sign into the the slots in the jail floor.
18
At an angle, insert the jail inner door top peg into the hole in the jail floor. Slide the jail inner
door bottom peg into the hole in the base.
Apply label #3 as shown in the illustration.
Inside View
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain,
telephone 01628 500303.
In Australia, Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Consumer Advisory Service 1-800-800-812 (valid only in Australia).
5
18
14
15
16
17