Filter
Top Products
Assembly
Front View
1
Open the base and position it so that the front faces you.
2
Position the right main door with the flat, rectangular area facing you.
3
Fit the right main door top peg into the upper hinge in the door opening.
4
Slide the right main door bottom peg into the lower hinge in the door opening.
5
Repeat this procedure to attach the left main door.
6
Fit the end of the flag post to the peg on the top surface of the base.
7
Insert and snap the peg on the toy latch into the hole in the front of the base, above the cactus.
8
Fit the fence clamps to fence posts to create the corral.
Proper label application will help to keep the labels looking their best.
• Wash your hands before applying the labels.
• Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a
clean, soft, dry cloth to remove any dust or oils.
• For best results, do not attempt to apply a label more than once.
• Apply the labels (#1, #5, #10 and #14) as shown in the illustration.
3
3
1
1
5
4
2
8
7
6
1
5
10
14