Filter
Top Products
4
Assembly
• Fit the side panel with the oval openings to the other
side of the main assembly. Make sure the pegs in the
side panel fit into the holes in the main assembly.
•Insert two screws through the side panel and into the
main assembly as shown. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
7
• Fit the side panel with the rectangular opening to
the main assembly. Make sure the pegs in the side
panel fit into the holes in the main assembly.
•Insert two screws through the side panel and into the
main assembly as shown. Tighten the screws with a
Phillips screwdriver. Do not over-tighten.
6
Side Panel
with Rectanglular
Opening
Peg
Hole
• Slide each shelf into the groove in each side panel.
5
Shelves
Groove
• Plug the large connector from the front panel into the
connector from the back panel as shown.
Connector from
Back Panel
4
Side Panel
with Oval
Openings
Side Panel
with Rectanglular
Opening
Main
Assembly
Side Panel
with Oval
Openings
Main
Assembly
Large Front
Panel Connector
Peg
Hole