Filter
Top Products
8
Assembly
• While pushing down on the seat, insert the seat pin
through the hole in the seat and into a seat mount
adjustment hole.
11
Seat Pin
• Insert 13 - #8 x
¾
" screws into the handle top
and tighten.
13
• Place the base/handle assembly on a flat surface so that
the wheel retainers are upright.
• Fit the trike onto the base/handle assembly so that the
rear frame rests in the grooves in the base and the front
wheel fits between the wheel retainers in the base/handle.
14
Wheel
Retainers
Base/Handle
Grooves
• Fit the handle top and bottom to the end of the base,
as shown.
12
Handle Top
Base
Handle Bottom