Filter
Top Products
6
Assembly
• Place the front wheel assembly between the fork arms
so that the pedal axle fits into the groove at the bottom
of each fork arm.
• Place a fork cover over the pedal axle on one fork arm.
• Insert two #10 x
¾
" screws into the fork cover
and tighten.
• Repeat this procedure to attach the other fork cover to
the other fork arm, using the #10 x
¾
" screws.
6
Fork Cover
Fork Arms
Groove
Pedal Axle
Front Wheel Assembly
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY 14052, U.S.A.
©2008 Mattel, Inc. All Rights Reserved. ® and
TM
designate U.S. trademarks of Mattel, Inc.
• Turn the frame upright.
• Insert the fork post up through
the hole in the frame neck. Make sure the fork is
positioned so that the fork covers face the rear wheels.
• Place the handlebar over the fork post and push it down
onto the frame. Make sure the handlebar is positioned so
that the screw hole faces the rear wheels and aligns with
the screw hole in the fork post.
• Insert the #8 x 3" screw through the hole in the handlebar
and into the fork post so that part of the screw (about
¾")
is still visible
. Tighten the screw.
7
Handlebar
Frame Neck
Fork Covers
Fork Post
PRINTED IN MEXICO 73528c-0920
FIRST, insert the screw
so that
¾
"
is visible.
THEN, tighten the screw.
¾
"