Filter
Top Products
Center Tube
Piece
• Insert and “snap” the tabs on one of the center tube pieces
into the slots in the other center tube piece.
6
4
3
Bottom Track
Front Holes
Do Not
Insert the
1" Screws
Here
Center Tube
Piece
3
PUSH
• Insert two #6 x
3
/8" screws through the remaining two holes
in the foot and into the base, as shown.
•Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Repeat steps 2 through 5 to attach the other three feet.
•Turn the base over.
• Insert two #6 x
3
/
4
" screws through the front holes in the foot
and into the base, as shown.
•Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Push down in the center of the foot to “snap” it into place.
• Be sure the tabs are under the edge of the base and the
pegs fit snuggly in the holes on the bottom track.
5
#6 x
3
/
8
" - Screw
Shown Actual Size
#6 x
3
/
4
" - Screw
Shown Actual Size