Filter
Top Products
• Place a scrap block of wood under the front wheel assembly.
• Fit a pedal onto one end of the front axle.
• With the lock washer centered over the front axle end, tap
the pedal until it is secure.
• Repeat this procedure to attach the other pedal to the other
end of the front axle.
• Position the fender between the fork arms, so that the
pointed end of the fender is facing up and the grooves on
the fork are facing down.
• Insert one
5
/8
"
screw through the fender and into the fork.
Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Place the front wheel assembly between the fork arms so
the front axle rests in the groove on each fork arm.
• Fit a front axle cover on the front axle on one fork arm.
• Insert two
5
/8
"
screws through the front axle cover and into
the fork. Tighten the screws with a Phillips screwdriver. Do
not over-tighten.
• Repeat this procedure to attach the front axle cover to the
other side of the front wheel assembly.
Groove
Front Axle Cover
Groove
Pointed
End
5
Pedal
Assembly
Front Axle
Fender
Fork
Fork Arm
Front Axle
Front Wheel
Assembly