Filter
Top Products
Assembling the Play Quilt
Attaching the Activity Toys
Tubes
Support
Slots
Straps
Play Quilt
Activity Toys
Activity Toys
Activity Toy Straps
Long Activity Toy Strap
“T” Tab
Chicken Activity Toy
Roller Ball
• Place the play quilt print side up on a flat surface.
• Fit the two straps on each side of the play quilt down
through the slots in the supports. Make sure the tab at the
end of each strap forms a “T” under the support. Pull up on
the play quilt to be sure it is secure to the supports.
• Fit the two small fastener straps on each end of the tubes
through the slots inside the circular opening in the sup-
ports. Fasten the fastener straps together to secure the
tubes to the supports.
• Locate the longest activity toy strap on the tubes.
• Flatten the first tab on the longest activity toy strap.
• Insert the strap through the slot in the top of the
chicken activity toy. Make sure the tab at the end of the
strap forms a “T” under the slot.
• Pull firmly on the chicken activity toy to be sure it is secure.
Hint: To adjust the height of the chicken activity toy, flatten
each tab as you pull the strap through the slot. When the
toy is the desired height, make sure a tab forms a “T”
behind the slot. Pull firmly on the toy after each adjustment
to be sure the toy is secure.
• Spin the roller ball on the chicken activity toy to hear a
friendly tune and see flashing lights!
• Fasten the remaining activity toys to the Velcro fasteners
on the activity toy straps.
Fastener Straps
To prevent entanglement injury,
never place play quilt in a crib or playpen.
Never add strings, ties or other
products to this item.
WARNING
2