Fisher M6711 Baby Swing User Manual


 
8
Place your child in the seat and secure properly.
Hint: After turning on power, this product may not swing unless
there is a child in the seat.
Slide the power switch to any of five speed settings.
Give the seat a light push to start the swinging motion. Adjust
the power switch to the desired swing motion setting.
Hint: As with most battery-powered swings, a heavier child will
reduce the amount of swinging motion on all settings. In most
cases, the low setting works best for a smaller child while the high
setting works best for a larger child.
If swinging stops while using a lower setting, try a higher setting.
Give the seat a light push to start the swinging motion again.
Slide the music switch to on with low volume ; on with high
volume or off .
Be sure to turn this product off when not in use. Slide
the power switch to the off setting .
Room-to-Room Portability
Make sure your child is properly secured in the swing seat.
Grasp both handles, as shown, and lift.
Carefully carry the swing to another room. Be sure to set the
swing down on a non-elevated, flat surface.
Swinging and Music
Storage
Lift the seat bottom.
Press the frame release buttons on the inside of the frames and
push the front legs inward.
1
2
Power Switch
Music/Volume Switch