Filter
Top Products
Install Cup Holder (on
select models): Pull pad
off corner and place cup
holder on shell. Make
certain cup holder snaps
into place. Replace
pad. Cup holder
can be on either
side.
10
Choosing Restraint and Position
Your child’s height, weight and age determine how your
child restraint should be placed in the vehicle and which
restraint should be used.
5-35 lbs (2.3-16 kg)
19-36 in. (48-91 cm)
Rear-Facing using
5-point harness
Child and child restraint
face the back of the vehicle
and are placed in the back
seat.
22-40 lbs (10.1-18 kg)
34-43 in. (85.1-110 cm)
and Over 1 Year Old
Forward-Facing using
5-point harness
Child and child restraint
face the front of the vehicle
and are placed in the back
seat.
40-80 lbs (18.1-36.3 kg)
43-52 in. (110.1-1
32.1
cm)
and Over 1 Year Old
Belt-Positioning Booster
using vehicle
lap/shoulder belt
combination
Child and child restraint
face the front of the vehicle
and are placed in the back
seat. 5-point harness is
removed.
11
3
Lo
do
rel
ou
Preparing Child Restraint to Fit
Your Child
You MUST make these adjustments with your
child before you install the child restraint in the
vehicle.
Make sure LATCH belt
packaging is pulled free of
child restraint shell.
1
2
continued on next page.
Loosen harness by pushing
down on the harness
release lever while pulling
out on the harness.
Depending on your model,
the harness
release lever
may be under a
flap on the pad
in the front of
restraint.
4358-3432E Enspira 5pt 8/6/07 4:46 PM Page 13