Filter
Top Products
1
Fit top buckle plate over
bottom buckle plate. The
connection should be flat.
Position harness straps over
the child’s shoulders.
2
Hold buckle plates together
with one hand and buckle
with the other. Push buckle
plates into buckle until you
hear a “click.” Pull up on
harness to make sure
buckle is locked.
3
15
14
NOTE: Depending on your model, follow the unbuckling
and buckling steps that matches your buckle plates.
WARNING:
Failure to fasten and tighten the harness
system correctly can result in serious injury
or death.
5
Position the harness
retainer at mid-chest (even
with armpits), away from
the child’s neck.
4
Snap the harness retainer
together.
6
Pull on harness adjustment
strap to tighten harness
snugly.
NOTE: A snug strap
should not allow any slack.
It lies in a relatively
straight line without
sagging. It does not press
on the child’s flesh or push
the child’s body into an
unnatural position.
!
4358-3410D Alpha 5pt 1/26/06 11:39 AM Page 17