Filter
Top Products
6
Tails Switch
The Supernatural features a switch that allows the reverb signal to continue
being heard after the effect is bypassed. When the Tails Switch is set ON, the
Supernatural does not utilize true hardwire bypass. If you always want to use
true hardwire bypass, set the Tails Switch to OFF. When the Tails Switch is OFF,
reverb signal is cut off immediately when the effect is bypassed.
The Tails Switch is located under the Foot Switch and is accessed by pressing
in one of the Foot Switch Release Pins using the tip of a 1/4" guitar cable plug.
Once the Foot Switch is removed, the Tails Switch is visible inside the chassis
next to the button switch that turns the effect on and off. Slide the switch to the
left to turn Tails ON and to the right to turn Tails OFF.