Filter
Top Products
Hardware Redundancy and Node Administration Debug Commands on Cisco IOS XR Software
debug socket
DHR-6
Cisco IOS XR Interface and Hardware Component Debug Command Reference
debug socket
To debug the socket library, use the debug socket command in EXEC mode. To disable debugging, use
the no form of this command.
debug socket {clns | raw | tcp | udp} {api | error | events | io} [location node-id]
no debug socket {clns | raw | tcp | udp} {api | error | events | io} [location node-id]
Syntax Description
Defaults The debug socket command is off by default.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
• Debugging output is assigned high priority in the CPU process and, therefore, can affect system
performance. For more information about the impact on system performance when using debug
commands, refer to Using Debug Commands on Cisco IOS XR Software.
Task ID
clns Enables the clns socket debug from the socket layer.
raw Enables the raw socket debug from the socket layer.
tcp Enables the tcp socket debug from the socket layer.
udp Enables the User Datagram Protocol (UDP) socket debug from the socket layer.
api Enables the socket debug for internal application programming interfaces (APIs).
error Enables the socket debug for errors.
events Enables the socket debug for events.
io Enables the socket debug for the input/output (I/O) path.
location node-id (Optional) Specifies debug information to enable a specified location (for example,
0/2/CPU0). The node-id argument is entered in the rack/slot/module notation.
Release Modification
Release 2.0 This command was introduced on the Cisco CRS-1.
Release 3.0 No modification.
Release 3.2 This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
transport read