Filter
Top Products
SKU 03882 For technical questions, please call 1-800-444-3353. PAGE 13
To Use The Pulley Hook:
1. With the Winch Cable Hook (57) and the accessory Pulley Block Assembly (56)
attached to the Steel Cable, the Pulley Block Assembly (56) allows you to offset
the Winch but retain a straight shot. The Pulley Block Assembly (56) can also be
used to nearly
double
the Winch’s capacity by simply attaching the Pulley Block
Assembly (56) directly to the load and the Winch Cable Hook (57) to a sturdy
mount near the Winch (such as the rear bumper). (See Figure H.)
2. To attach the Pulley Block Assembly (56) to the Steel Cable, remove the two Nuts
on the Pulley Hook. Then, remove one Side Plate on the Pulley Hook.
(See Figure H.)
3. Insert the Steel Cable beneath the Pulley. Then, reattach the Side Plate and the
two Nuts. (See Figure H.)
WINCH
CABLE
HOOK
(57)
ATTACH
PULLEY BLOCK ASSEMBLY (56)
TO LOAD
Pulley Block Assembly (56)
NUT
SIDE
PLATE
PULLEY
PULLEY
INSERT
STEEL
CABLE
HERE
FIGURE H
BUMPER