Filter
Top Products
1.4 The Rain Cover (accessory, not supplied as standard)
For each Chariot CTS a seamless rain
cover is available.
To fit the rain cover on the upper frame,
remove the handlebar and push the two
seals, which are welded round the holes
of the rain cover (or the elastic loops,
depending on the model) over the tube
ends. Re-attach the handlebar (see
section 1). Attach the rain cover on the
lower frame exactly as the combi-cover,
which is supplied as standard.
On the Cheetah, Cougar and CX two
elastic ribbons, situated in the right and
left lower area of the cover, are pulled
round the horizontal rectangular tube
and placed round the nut of the cover
fastening.
The rain cover is fitted correctly, when
the printed writing can be read from
the outside.
14
1.5 Special Functions of the model CX
The handlebar bag is attached to a
specially designed clip at the rear end
of the passenger compartment as well
to the handlebar itself by means of two
straps.
This model is equipped as standard with a handlebar bag, which can also be used as a child rucksack.