Filter
Top Products
CHANGING HARNESS STRAP SLOTS
❃ Use proper harness slots
• Rear-facing - Use bottom or middle slots which are
at
or just
below
child's shoulders.
• Forward-facing - Must use top slots only.
1 Loosen harness straps:
• Lift adjuster lever
(A)
to
release harness straps.
• Pull harness straps
(B)
.
2 Remove harness strap loops
from Splitter Plate.
3 Pull harness straps out of
current slots and thread through
desired slots.
NOTE: For ease of threading
harness straps, remove seat pad
from back of car seat.
Make sure harness straps are threaded through
matching slot
of seat pad and car seat.
4 Re-attach harness strap to
Splitter Plate:
• Slide each harness strap loop
onto Splitter Plate. Straps
must not be twisted.
5 Make sure Splitter Plate Strap
passes between recline stand
and car seat shell (see arrow).
NOTE: Splitter Plate Strap must
not be twisted.
6 Re-attach seat pad.
18
Splitter Plate Strap
(B)
(A)
Splitter Plate