Filter
Top Products
Adjust car seat to upright or semi-upright
position and place forward-facing on vehicle seat.
IMPORTANT: Level adjuster MUST be in
position 1 when using car seat forward-facing.
Lift seat pad flap.
Thread vehicle seat belt through opening and
behind panel.
Buckle belt (fig. a).
Press down firmly in center of car seat to compress
vehicle seat cushion while tightening vehicle seat belt.
HINT: Use your knee to press down in center
of car seat (fig. b).
Pull front to back and left to right to check for secure
installation (fig. c). Vehicle lap belt MUST stay tight.
If not secure, see “Vehicle Seat Belts” section.
Attach tether strap hook (A) to anchor hardware (B)
and tighten strap to remove any slack (fig. d).
If tether anchor hardware (B) is not available, see
“Installation of Anchor Hardware“ section.
FORWARD-FACING INSTALLATION
1
2
3
4
7
5
(fig. a) (fig. b) (fig. c)
Opening
(fig. d)
(B)
(A)
Pull to
tighten