Filter
Top Products
1 Set both rear brakes to prevent
stroller from moving.
2 Position child’s tray in up position:
• Rotate child’s tray over lower
edge of seat.
• Push child’s tray into slots.
• Pull on child’s tray to be sure
it is securely locked.
3 Position stroller back support
in reclined position:
Squeeze both levers on sides of
seat back to release.
4 With car seat handle in locked carrying position (upright)
insert car seat adapter Tongue into child’s tray Slot.
NOTE:
• Before attaching car seat, be sure to remove tongue of
child’s tray pad by pulling out red button and pulling
up on child’s tray pad.
• Car seat may be placed in child’s tray slot either
rear-facing or forward-facing.
1 LOCKING:
Push down on both brake
levers.
2 UNLOCKING:
Push up on both brake levers.
CAR SEAT/STROLLER USE
Locking Or Unlocking Rear Wheels
5
Attaching Car Seat
Rear-facing
Forward-facing
Tongue
Slot
Tongue
Slot
Smooth Surfaces - Use swivel wheels.
Push lever up on front of
wheel so that wheels can
swivel freely.
Rough Surfaces - Use straight wheels.
Push lever down on front
of wheel. When wheels
are straight, they lock in
place for straight tracking.
Locking Or Unlocking Front Wheel Swivels