Filter
Top Products
ENGLISH
4
ASSEMBLY continued
❃ Basket Assembly For Model 10-450 Only:
1 Snap sides of basket over both
bottom cross braces.
❃ Canopy Assembly For All Models:
1 Push canopy brackets into canopy
mounting brackets.
2 Pull canopy down and over back of
Bassinet and secure Velcro
®
tabs.
To Remove Canopy:
1
Push in tabs on mounting brackets
and pull upward.
❃ Bassinet Assembly continued:
5 Place Bassinet in stand.
NOTE: Bassinet floorboard
must rest on bottom of cradle
support rod.
6 Snap side skirt straps to top
cross braces.
7 Place mattress pad in Bassinet.
❃ Bassinet Assembly For All Models:
1 Straighten Bassinet frame legs
until lower curved section of legs
are nested in slots of floorboard.
2 Snap skirt straps over Bassinet frame.
3 Pull skirt over frame.
NOTE: Be sure canopy
mounting brackets extend
through openings in skirt.
4 Snap skirt to floorboard.
WARNING:
NEVER use Bassinet without
mattress pad as baby could
suffocate.