Filter
Top Products
English
Controlling the Keyboard Sounds
E-13
You can use the Digital Keyboard to sample a sound from a
portable audio player, or other device, and then play the
sound with the keyboard keys or voice pads. For example,
you could sample the bark of your dog and then use the
sound in a melody. You also can sample and use passages
from a CD. The sampling feature is a great way to create new
sounds that are highly creative.
Connect a external device.
• Connection requires commercially available connecting
cords, supplied by you. The connecting cords should have
a stereo mini plug on one end and a plug that matches the
configuration of the external device on the other end.
• Turn off the external device and the Digital Keyboard
before connecting them.
• Sampled sounds are recorded in monaural.
There are two sampling methods: full sampling and short
sampling.
■ Full Sampling
This method allows sampling of a single sound with a duration
of one second.
1.
Turn the volume levels of the external device
and Digital Keyboard down.
2.
Turn on the external device and then the Digital
Keyboard.
3.
Press
4
and immediately release it.
This enters record standby.
4.
Output the sound from the external device.
The Digital Keyboard will start sampling automatically,
and stop after one second.
• Sampling will not start if the volume level of the external
device is too low.
• What you sample is stored as tone number 401.
5.
Try playing something on the keyboard.
• You can press pad 4 or 5 (
ck
or
cl
) to sound the
sampled sound (page E-8).
• A new sample replaces sample data currently assigned to
tone number 401. All of the old data (including short
sampled sounds) is deleted.
Sampling a Sound and Playing It
on the Keyboard (Sampling)
Connection
Sampling a Sound and Playing It
Digital Keyboard AUDIO IN jack
CD player, Cassette player,
etc.
Stereo mini plug
Flashes
W
ai t ing
Flashes
Lights
Samp l i ng
Or iginal