Casio CTK-2090 Musical Toy Instrument User Manual


 
English
Playing the Digital Keyboard
EN-7
The metronome lets you play and practice along with a steady
beat to help keep you on tempo.
1.
Press
4
.
This starts the metronome.
2.
Press
4
again to stop the metronome.
You can configure the metronome to use a bell sound for the
first beat of each measure of the song you are playing.
You can specify 0, or a value from 2 to 6 as the number of
beat per measure.
When playing a built-in song, the beats per measure setting
(which determines when the bell sounds) is configured
automatically for the currently selected song.
1.
Hold down
4
until the beats per measure
setting screen appears on the display.
If you do not perform any operation for after the beats
per measure setting screen appears, the display will
return to the screen displayed before you pressed
4
.
2.
Use
bp
(10-key) to enter the number of beats
per measure.
The bell will not sound if you specify 0 for this setting. In
this case, all beats are indicated by a click sound. This
setting lets you practice with a steady beat, without
worrying how many beats there are in each measure.
Use the following procedure to change the tempo of the
metronome.
1.
Press
5
.
Use w (slower) and q (faster) to change the tempo
setting. Holding down either button changes the setting at
high speed.
Pressing w and q at the same time will initialize the
tempo setting in accordance with the currently selected
song or rhythm.
Pressing
5
causes the tempo value to flash on the
display. While the tempo value is flashing, you can use
bp
(10-key) to change it.
Note that you must input leading zeros, so 89 is input
as 089.
The tempo value will stop flashing if you do not perform
any operation for a short while.
The metronome volume setting is changed automatically with
the volume level of the currently selected Auto
Accompaniment or song. The metronome volume cannot be
adjusted independently.
For information about changing the Auto Accompaniment
volume, see page EN-31.
For information about changing the song volume, see page
EN-19.
You cannot adjust the balance between the metronome
and note volume during Auto Accompaniment and built-in
tune play.
Using the Metronome
Start/Stop
Changing the Beats per Measure
This pattern changes with each beat.
Bea t
Changing the Metronome Tempo
Changing the Metronome Sound Volume
Tempo value (flashes)
CTK2400_A5_x1a_EN_ES.indd 9 2014/02/10 19:12:50