Filter
Top Products
EN-46
Configuring Digital Piano Settings
■ CONTROLLER Screen
Use this to configure pedal and pitch bend wheel settings.
Operation Lock When this setting is turned on, the Digital Piano’s buttons (except
for the 1 P button and buttons required for unlock) are locked, so
no operation can be performed. Turn on operation lock when you
want to protect against unintentional button and control panel
operations.
Off, On
Auto Resume When “On” is selected for this setting, the Digital Piano will
remember its settings whenever it is turned off, and restore them
when it is turned on again.
When “Off” is selected, settings are reset to their initial defaults
whenever the Digital Piano is turned on.
Off, On
Auto Power Off Specifies if Auto Power Off (page EN-7) is enabled (On) or disabled
(Off).
Off, On
Factory Reset Use this screen to return the piano’s stored data and settings to their
initial factory defaults.
–
Item Description Setting
Upper1 Pedal Turn on to apply the pedal effect to the main tone when the pedal is
depressed.
Off, On
Upper2 Pedal Turn on to apply the pedal effect to the layered tone when the pedal is
depressed.
Off, On
Lower1 Pedal Turn on to apply the pedal effect to the split (main) tone when the pedal is
depressed.
Off, On
Lower2 Pedal Turn on to apply the pedal effect to the split (layered) tone when the pedal is
depressed.
Off, On
Bend Range Specifies (in semitone units) how much the pitch of the keyboard
performance parts (Port A parts 1 through 5) changes when the pitch bend
wheel is rotated all the way upwards or downwards.
00 to 24
Item Description Setting
CGP700-ES-1A.indd 48 2015/04/03 15:59:47