Filter
Top Products
6 BURLEY STROLLER KIT OWNER’S INSTRUCTION AND SAFETY MANUAL
To Adjust the Tracking
To adjust the tracking of the stroller wheel (which allows the stroller to roll
straight), loosen set screw with 5/32" hex wrench, adjust the bushing with
a 3/4" wrench. (See the illustration below or above). Turn the bushing until
the wheel is perpendicular to the ground. Test the tracking by pushing the
stroller away from you to make sure it rolls straight. Make any additional
adjustments before putting your child in the trailer.
When aligned tighten set screw.
To Convert from Strolling to Trailering
The wheel must be placed in the up position in order to attach the trailer to
a bicycle. The conversion from “Stroller” (down) position to “Bike trailer”
(up) position, is quick and requires no tools. First, engage the parking brake.
Loosen the wheel pivot assembly knob by turning it counterclockwise, until
the triangular pivot section can be rotated. Swing the wheel up until the
word “BIKE” on the triangular pivot section appears. The arrow should point
at the “B” in “BIKE”. Line up the small triangular section with the larger
triangular section (with
“BIKE” printed on it).
Tighten the knob. Now
attach the trailer to your
bike, using your Burley
hitch, retaining pin or
bolt, and safety strap.
Bushing
Set Screw
Shown without wheel
pivot assembly knob