Filter
Top Products
ENGLISHENGLISHENGLISHENGLISHENGLISHENGLISH
3
3
After a short while, the first Add New
Hardware Wizard dialog box appears.
Click [Next].
4
Make sure that “Search for the best
driver for your device.
(Recommended)” is selected, and then
click [Next].
5
Insert the enclosed CD-ROM into the
computer’s CD-ROM drive.
6
Select “CD-ROM drive”, and then
after 5 to 10 seconds, click [Next].
7
When UsbWriter appears, click [Next].
8
When the dialog box shown at the
right appears, click [Finish].
This completes the installation of the driver
software.
When using XP, select “Install from a list
or specific location (Advanced)” on the
first Wizard screen and click [Next].
Depending on the operating system, the
dialog box shown in step 9 may also
appear; however, the operation
described in step 8 should be performed
before continuing to step 9.
Depending on the operating system, the
message “No digital signature.” may
appear; however, the installation can be
continued.
A message may appear, indicating that
the computer should be restarted; how-
ever, it is not necessary to restart yet, so
click [Cancel].