Filter
Top Products
12
Care and Maintenance
Operating Instructions
13
Harness Parking Brake
• Periodically check that the parking brake works properly and locks both wheels securely.
• Clean out any dirt or debris that may prevent the brake from working.
Frame
• Wipe the frame with a damp cloth and mild soap. Use clean, dry cloth or towel to wipe away
excess water and soap.
Fabric
• Do not machine wash or dry the cover.
• Hand wash with cold water and mild soap. Air dry to prevent the cover from shrinking.
Cleaning Plastic Parts:
• Wipe with a damp cloth and mild soap. Use clean, dry cloth or towel to wipe away excess water
and soap.
Wheels
• Periodically oil caster bolts and wheel axles with liquid silicone lubricant.
If Stroller Gets Wet:
• Dry stroller with a clean cloth or towel to prevent corrosion.
• Do not fold stroller when wet or damp. Always make sure that the stroller is dry before storing.
Plastic Parts
• Do not use abrasives, solvents, strong detergents, or household cleaners. These products can
scratch, discolor, and weaken plastic or cause corrosion on metal surfaces.
Storage
• Store away from extreme heat to prevent damage to plastic parts.
• Cover stroller to prevent dust build-up and exposure to sunlight.
• Do not stack other items on top of stroller.
1
Position harness around child.
2
Insert each clip (2x) into adjacent side of
buckle (fig. A).
A
3
Loosen or tighten harness by sliding each
(5x) adjuster to desired position (fig. B).
B
D
4
If necessary, use buckle loop for better fit.
Unfasten buckle, then thread through loop
(fig. C) for smaller child. Unthread when
child requires more room in the harness.
C
5
Unfasten buckle by squeezing clip on
each side (fig. D).
P251400_R01e.qxd 11/29/2004 3:24 PM Page 14